![EVA case insert for sensor tester kit](https://api.divesoft.eu/resources/static/2023/3/9/9meal_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_1.jpg.as.webp)
![EVA case insert for sensor tester kit](https://api.divesoft.eu/resources/static/2023/3/9/9meal_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_1_450x450.jpg.as.webp)
![EVA case insert for sensor tester kit #1](https://api.divesoft.eu/resources/static/2023/3/9/9meal_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_1_87x87.jpg.as.webp)
![EVA case insert for sensor tester kit #2](https://api.divesoft.eu/resources/static/2023/3/9/1i1bl_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_2_87x87.jpg.as.webp)
EVA case insert for sensor tester kit
Requested by US-based cave explorer Jason Richards this insert was developed to allow owners of the Liberty Oxygen Sensor Tester Kit to transport and/or store it more effectively by using another product from Divesoft, the EVA case (#3433) used for HE/O2 and ODA. All components of the sensor tester kit can now fit in an organized fashion into this case. A layer of foam or soft material +/- 5-10mm thick above and below this organizer will help minimize rattling or a weld nut can be glued to the bottom and a fastener used to clamp components to each other as an alternate.
Maximum exterior dimensions are 230 x 181 x 60mm (9.05 x 7.13 x 2.36in)
Final results will vary based on your 3D printer, material, and settings but with PETG & 30% infill the weight it +/- 495g (17.46oz)
![EVA case insert for sensor tester kit](https://api.divesoft.eu/resources/static/2023/3/9/9meal_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_1.jpg.as.webp)
![EVA case insert for sensor tester kit](https://api.divesoft.eu/resources/static/2023/3/9/9meal_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_1_450x450.jpg.as.webp)
![EVA case insert for sensor tester kit #1](https://api.divesoft.eu/resources/static/2023/3/9/9meal_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_1_87x87.jpg.as.webp)
![EVA case insert for sensor tester kit #2](https://api.divesoft.eu/resources/static/2023/3/9/1i1bl_3877_divesoft_3d_eva-case-insert-for-sensor-tester-kit_2_87x87.jpg.as.webp)
EVA case insert for sensor tester kit
Requested by US-based cave explorer Jason Richards this insert was developed to allow owners of the Liberty Oxygen Sensor Tester Kit to transport and/or store it more effectively by using another product from Divesoft, the EVA case (#3433) used for HE/O2 and ODA. All components of the sensor tester kit can now fit in an organized fashion into this case. A layer of foam or soft material +/- 5-10mm thick above and below this organizer will help minimize rattling or a weld nut can be glued to the bottom and a fastener used to clamp components to each other as an alternate.
Maximum exterior dimensions are 230 x 181 x 60mm (9.05 x 7.13 x 2.36in)
Final results will vary based on your 3D printer, material, and settings but with PETG & 30% infill the weight it +/- 495g (17.46oz)