Derived out of a need for more desk/workbench space, at Divsoft US, this wall mount was developed to move the Liberty Head up off the desk during charging/drying while keeping essential components handy. Liberty rebreather heads configured with the banjo O2 connector will self-align to automatically face the logo outwards making an attractive display. The helium sensor drying fan and charging cables can be plugged in from the opening at the bottom while the battery jumpers store in their own trays. A provision for storing a 3mm hex driver as well as hooks for handsets/handset connectors are also contained in the design. The three mounting holes in the back are spaced to work with peg board holes on your work bench or you can mount directly to the wall using the appropriate anchors.

Maximum exterior dimensions are 260 x 197 (10.24 x 7.76in) 

Final results will vary based on your 3D printer, material, and settings but with PETG & 30% infill the weight it +/-370g (13.05oz)

Warning! This mount puts your expensive device up in the air where it could fall and be damaged. Use common sense and avoid placement where it could easily be bumped. Avoid placing it at extreme heights or above items that may be damaged by or damage the head if it fell.

Use of this mount is completely at the discretion of the user.

Divesoft staff printed several of these for their own use and in a variety of infills, it’s surprisingly strong but still care should be taken to avoid accidents.